Dedicated Epoxy Anticorrosive Powder Coating for Rebars

Product generous state:
Is a thermosetting epoxy powder coating specially modified heavy-duty reinforced epoxy anticorrosion coating design, this product is made of imported special two-step epoxy, part functional epoxy curing agent with a unique special preservative, formulation design , the authoritative department detection and practical, has an excellent reactivity, has superior adhesion, good toughness and bending resistance, excellent chemical resistance, solvent resistance, cathodic stripping resistance, impact resistance and other properties.
Product Features:
1. The substrate has a very good adhesion.
2. The coating dense, continuous, bright, anti-infiltration, less leak points.
3. The coating has excellent resistance to cathodic disbondment resistance and high electrical insulation.
4. The coating and high bond strength of concrete, strong bond.
5. Has good toughness, bend without cracking.
6. The low melting temperature, high reactivity, curing completion rate, good mechanical properties.
7. versatility, low powder consumption.
8. reinforced powder coating to reduce or avoid the drawing phenomenon.
Applications: can be widely used in bridges, ports, airports, buildings, basements, high-speed rail.
Implementation of the standards: JG 3042-1997; GB / T 25826-2010;
Construction Description:
Spraying conditions: electrostatic spraying
Pre-treatment: steel surface descaling clean, exposed metal colors; steel surface roughness treatment quality standard, appropriate for the 50-70mm; rust rating to Sa2 1/2 class (GB / T8923, no chloride steel surface adhesion .
Preheating temperature: reinforced surface temperature should be controlled at 220-245 ℃.
storage:
As the product has a very high reactivity, it is recommended for the best within the storage period of three months under 27 ℃. Expired use, subject to prior verification of their performance.
note:
The product should be stored in ventilated, dry, indoor temperature below 27 ℃, away from the heat source, corrosive chemicals and chemical solvents, to avoid glare; maximum stack height easily over four layers; avoid prolonged pressure, to ensure airtight containers, in order to avoid clumping and moisture, affect the flow of the performance.

The powder coating does not contain toxic substances, baking and no toxic gases. But in the course of inhalation of dust should be avoided, the operator should wear dust masks, glasses, protective clothing and other protective equipment, and to minimize prolonged contact with the skin, attached to dust the skin, wash with soap.

Disclaimer:
This technical information is only for reference, specific indicators are detected in income under certain conditions, represent the characteristics of the product.