HOTLINE:400-968-9677    中文版    English

·
Powder coating

Metal Bonding Powder Coating

 

Hotline:0536-8673066
Details

product description:
The use of advanced bonding technology, the use of organic metallic pigment powder was added to bond Bonded technology to achieve plating, crystal-like metallic luster, silky bright pearl luxury decorative effect.
Application:
Suitable for a variety of indoor and outdoor metal products: fitness equipment, car wheels, stroller, motorcycle parts and so on.
characteristic:
To paint a very good adhesion to the substrate, the film has good mechanical properties.
Bonding process:
Powder primer powder into molten metal paint → → → mixed → bonding → dispersed agglutination → Adjustment → plating effect of the product.
Basic performance:
Specific gravity: 1.2-1.7 [g / cm3] (due to different color and gloss)
Particle size: varies according to different uses, average particle size is 35-40 um
Storage: 30 ℃ or less dry room, avoid direct sunlight, packaging intact under stable storage for 12 months; over this period, the test is still to meet the requirements, can still be used
Utilization: 8-12㎡ / kg, a thickness of 70um (need 100 percent utilization). Body painting equipment and artifacts, the actual spraying area will vary
Transportation: Non-dangerous goods for all modes of transport, avoid prolonged direct sunlight, avoid water, oil and other chemical pollution.
Coating results:
Appearance of the product has a variety of surface effects, according to customer demand different selectable from low to high surface gloss and special effects: such as various wrinkles, sand grain, metallic effects, etc. (please refer to the Company Powder Coating Effects Color Card) It can also be customized (special functional inclusive) according to customer demand.
Spray Guide:
The products according to customer requirements can be met: corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed coating, fluidized bed dipping

Construction conditions:
Spray Guide This product can meet: friction electrostatic spraying, corona electrostatic spraying.
Film thickness: 40-80μm range
Surface treatment process to select the appropriate method depending on the metal and wood (can the company to obtain the relevant technical information).
Maintenance and repair:
Powder coating surface should be cleaned on a regular basis, in areas of heavy salt or polluted areas, should increase the number of clean-up.
Health and Safety:
Powder coating does not contain toxic substances, baking and no toxic gases, but it should avoid inhaling dust during use, the operator should wear dust masks, glasses, protective clothing and other protective equipment, and to minimize the length of the skin contact time, dust attached to the skin, wash with soap, paint used in toys shall be made in advance, to ensure that does not contain metallic elements, to avoid damage to the health of children.