HOTLINE:400-968-9677    中文版    English

·
Powder coating

Single Epoxy Anticorrosive Powder Coating

 

Hotline:0536-8673066
Details

product description:
This product uses an epoxy functional curing agent, well-designed, this product has a high reactivity, has a strong adhesion, high crosslink density coating with excellent chemical resistance, solvent resistance , cathodic disbondment resistance, excellent flexibility, impact resistance and other properties.

Product Features:
1. The substrate has a very good adhesion.
2. Good leveling coating surface, high gloss.
3. Has a strong anti-infiltration and corrosion resistance.
4. High surface hardness, dense coating is strong, has good resistance to puncture plant roots.
5. The coating has excellent resistance to high temperature cathode stripping ability.
6. The melting temperature is low, high reactivity, completion of the curing rate.

Application:
Municipal, water supply, drainage, sewage, recycled water, chemical, thermal and other pipelines

 

Executive Standard: SY / T 0315-2005

Construction Description:
1, the spraying conditions: electrostatic spraying, dipping, fluidized bed
2, pre-treatment: steel surface should be free of oil and water; surface treatment quality should reach Sa2 1/2 class (GB / T8923); anchor pattern depth appropriate for the 50-90mm; steel surface adhesion of dust and abrasive material should be purged.
3, preheating temperature: pipe surface temperature should be controlled at 180-230 ℃
4, curing temperature: Pipe surface temperature should reach 200 ° / 10 min or 180 ° / 15 minutes
5, test packaging: steel surface quality can check and repair the leak at 80 ° or less.

Powder storage:
The product should be stored in ventilated, dry, indoor temperature below 27 ℃, away from the heat source, corrosive chemicals and chemical solvents, to avoid glare; maximum stack height easily over four layers; avoid prolonged pressure, to ensure airtight containers, in order to avoid clumping and moisture, affect the flow of the performance.

Health and Safety:
The powder coating does not contain toxic substances, baking and no toxic gases. But in the course of inhalation of dust should be avoided, the operator should wear dust masks, glasses, protective clothing and other protective equipment, and to minimize prolonged contact with the skin, attached to dust the skin, wash with soap.

Disclaimer:
This technical information is only for reference, specific indicators are detected in income under certain conditions, represent the characteristics of the product. When customers use, the actual case prevail.