Epoxy Powder Coating for Faucet

I. Introduction
This product is epoxy powder coating designed for water transport water pipeline coating and design, using excellent modified epoxy phenolic, special crosslinking agents, food-grade fillers dispositions. The product has a high reactivity, strong adhesion, high crosslink density, the coating has excellent corrosion resistance, toughness, chemical resistance, adhesion and excellent mechanical and physical properties.
Second, product characteristics
1, the substrate has a very good adhesion. 5, the melting temperature of the low surface leveling is excellent.
2, with a strong anti-infiltration and corrosion resistance. 6, the film is extremely flexible.
3, the appearance of surface leveling good, dense and strong coating.
4, in line with protective materials in drinking water safety standards.
Third, the application areas
2, used in municipal drinking water pipes special anti-corrosion coating.
Sixth, the implementation of standards: CJ / 120-2008, GB / T17219-2008
Seven, Construction Description
1, coating method: a, high-voltage electrostatic spraying / priming coat b, fluidized bed dipping c, Pit dip
2, the proposed film thickness: 300 ---- 400um (depending on the substrate diameter)
3. Surface treatment: acid phosphate or sand blasting, shot blasting, anchor pattern depth 50--80um.
4, the workpiece preheating: tunnel furnace heating, front steel surface dusting reach 130 --- 180 °, not less than 130 °
5, the curing temperature: tunnel furnace heating, heating pipe surface reaches 180 ° / 15min, 200 ° / 10min
6, test packaging: steel surface quality can check and repair the leak at 80 ° or less.
Eight, health and safety
First, the powder coating does not contain toxic substances, in baking and no toxic gases. But in the course of inhalation of dust should be avoided, the operator should wear dust masks, glasses, protective clothing and other protective equipment, and to minimize prolonged contact with the skin, attached to dust the skin, wash with soap.
Second, when used with other anti-corrosion powder can not be recovered powder coatings and powder mix, and color change will spray equipment thoroughly cleaned to ensure the safety of drinking water quality, drinking water in line with GB / T17219 health standards.

Nine, affirms
This technical information is only for reference, specific indicators are detected in income under certain conditions, represent the characteristics of the product. When customers use, subject to the actual case.